|
|
Products:Hotplates / Flask Heaters
|
|
|
Hotplate / Flask Heater products in this section:
|
|
|
|
GLASS CERAMIC HOTPLATE/STIRRER
In addition to fast or temperature controlled heating, many applications require liquids to be stirred. With the SLR heating stirrer, the process of mixing liquids can be performed from gentle to vigorous. This device can also be used for speedy heating up or controlled temperature adaptation. All functions can be viewed and monitored on the large LCD display. The rpm range of the stirrer stretches from 100 to 1000 min-1 and can be set in steps of 10 min-1. The heating power can be set in 24 steps and reaches an average heating output of 0.9 kW at step 24. A PT 1000 temperature sensor may be connected. Temperature controlled work with fluctuations of +/- 2ºC to 5ºC as a function of liquid volume, heat capacity, and ambient temperature is possible between 25-200 ºC. Maximum heating is approximately 550 ºC. The display will inform the user at intervals of 5s about the set and actual temperature. The mean rpm is indicated in the form of a bar graph.
DUAL POSITION HOTPLATE
The multiple talents of the SLK6 are particularly suited for laboratories with highly differing tasks. This unit combines a hotplate on one side and a hotplate / stirrer on the other. The heating and stirring can be set in 9 steps. The rpm range of the stirrer is 100 to 1000 min-1. The temperature limit is approximately 600 ºC. A PT1000 temperature probe can be added for exact temperature readout. The device is controlled via infrared touch control technology.
HOTPLATES AND SANDBATHS
These state of the art hotplates can be sued for all heating tasks in today's modern laboratory. The electronic temperature control is extremely precise and controls the temperature of the plates between 25-400 ºC (precision of +/- 5K in the upper range). Another benefit of this precision controller is an even heat distribution over the aluminum hotplate, ensuring optimal heat transfer. Four models with different size heating area are available.
SERIAL HOTPLATES
These hotplates can be used for many different applications. They are equipped with either 4 or 6 85mm diameter heaters, each individually controlled, with a 2 pole mains switch and pilot lamp including power cord. Multi functional due to the wide range of accessories available. Maximum temperature is 425 ºC, also available as individual heaters.
HOTPLATE/FLASK HEATERS
Compact heater for the laboratory with a hotplate of 85 mm. With continuously adjustable energy controller and excess current cutoff with pilot lamp. Maximum temperature is 425 ºC for hotplate and 650 ºC for flask heaters.
GLASSWARE DRYER
Hot air fan for reliable rapid drying of laboratory glassware. Rotary hollow support stem mounted on the base, with 56 lateral drying tubes, 24 tubes of 16 mm for large vessels, 32 tubes of 11 mm for smaller vessels. Built in 900 W fan with heating grill blows filtered air into the tubes. Maximum temperature is about 50 ºC. Control panel at the front with double pilot lamp for power supply and heating, power switch for cold or warm operation and electric timer.
|
|
 |
Contact us online or call 866-435-7897 to request a quote, discuss your application or arrange a product demonstration.
|
|
|
|
|
|
