|
|
Cutting Mill Combination, Pulverisette 25/19
Suitable for grinding for extremely heterogeneous samples.
Field of application
The Cutting Mill Combination can reduce 2 litres of material with a maximum edge length of 30 mm down to < 500 µm and provide an accurate representative sample ready for analysis in one within 5 minutes. Amongst other applications its main use is for the preparation of heterogeneous materials for analysis according to the standard method for domestic waste, for for the determination of calorific value and chlorine content (e.g. in cement plans) as well as for RoHS testing. It has been spefically designed to deal with very heterogeneous materials such as household waste, building rubble, German Recycling System bales or light shredder fractions from recycling.
Method of operation
The Cutting Mill Combination which consists of the Power Cutting Mill pulverisette 25 and the Universal Cutting Mill pulverisette 19 processes the whole sample by initially grinding the material in the pulverisette 25. The ground sample then enters a funnel where sample division takes place. The ratio is adjustable but the standard setting divides the sample in the ratio of 1 to 13.
Features of performance
- drastically reduced cleaning requirements
- suitable for extremely heterogeneous samples
- fully automatic, two-stage grinding
- sample extraction via cyclone separator to glass sample collection vessel
- convenient material feed facility
- removal of milling parts without tools
- minimal dead space
- integrated sample exhauster with cyclone separator
- cooling throughout process
- high throughput
- process tolerates up to 30% moisture content in sample
Equipment
The cutting mill combination pulverisette 25 - pulverisette 19 offered in the price list under article number 19.5030.00 is a standard cutting mill combination system composed for universal applications. It consists of: Power Cutting Mill with 2 litres funnel, Universal Cutting Mill, interposed sample divider, under frame and sample exhauster with cyclone separator, inclusive hard metal tungsten carbide cutting tool sets and sieve cassettes.
The cutting mill combination pulverisette 25 - pulverisette 19 is also available in other configurations and can be fitted with any accessory that is available for the Power Cutting Mill pulverisette 25 and the Universal Cutting Mill pulverisette 19. These accessories can be found in the appropriate individual leaflets.
| Electrical details: |
400 V/3~ |
| Frequency: |
50-60 Hz |
| input power: |
6340 W |
| Working Principle: |
cutting |
| Materials of the grinding parts: |
Tool steel, hard metal tungsten carbide |
| grinding parts: |
cutting rotor |
| Rotor speed: |
2800 rpm |
| Max. feed size depending on the material: |
120 x 85 mm |
| max. throughput depending on the material and sieve size: |
60 l/h |
| sieve inserts: |
0.25 - 6 mm |
| Over All Dimensions (WxDxH): |
On stand: 62x82x145 cm |
| Weight net: |
214 kg |
| Weight gross: |
244 kg |
| suitable for the following sample materials: |
medium-hard, brittle, tough, fibrous |
|
|
 |
Contact us online or call 866-435-7897 to request a quote, discuss your application or arrange a product demonstration.
|
|
|
|
|
|
